China Wholesale Micro Limit Switch Manufacturers - DK4-BZ-019 – Tongda
China Wholesale Micro Limit Switch Manufacturers - DK4-BZ-019 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
|
(Free Position) |
FP |
mm |
(Operating Position) |
OP |
mm |
|
(Releasing Position) |
RP |
mm |
|
(Total travel Position) |
TTP |
mm |
|
(Operating Force) |
OF |
N |
|
(Releasing Force) |
RF |
N |
|
(Total travel Force) |
TTF |
N |
|
(Pre Travel) |
PT |
mm |
|
(Over Travel) |
OT |
mm |
|
(Movement Differential) |
MD |
mm |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 10(1.5)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
(between terminals and the metal frame) | 1500V/0.5mA/60S | ||
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥3000000 cycles | |
7 |
(Operating Temperature) | -25~105℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles(Mechanical):60 cycles | |
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability): (More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃(Immersing Time):2~3S | |
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S(Manual Soldering):300±5℃ 2~3S | |
12 |
(Safety Approvals) |
UL、CSA、TUV、ENEC |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃(Relative Humidity):65±5%RH
(Air Pressure):86~106KPa |
Product detail pictures:

Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our organization for your long-term to establish alongside one another with shoppers for mutual reciprocity and mutual benefit for China Wholesale Micro Limit Switch Manufacturers - DK4-BZ-019 – Tongda , The product will supply to all over the world, such as: Liverpool , Israel , Lebanon , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!

Write your message here and send it to us