China Wholesale Micro Switch No Nc Manufacturers - HK-04G-1AZ-029 – Tongda
China Wholesale Micro Switch No Nc Manufacturers - HK-04G-1AZ-029 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
(Value) |
|
(Free Position) |
FP |
mm |
12.1±0.2 |
(Operating Position) |
OP |
mm |
11.5±0.5 |
|
(Releasing Position) |
RP |
mm |
11.7±0.5 |
|
(Total travel Position) |
TTP |
mm |
10.5±0.3 |
|
(Operating Force) |
OF |
N |
1.0~3.5 |
|
(Releasing Force) |
RF |
N |
— |
|
(Total travel Force) |
TTF |
N |
— |
|
(Pre Travel) |
PT |
mm |
0.3~1.0 |
|
(Over Travel) |
OT |
mm |
0.2(Min) |
|
(Movement Differential) |
MD |
mm |
0.4(Max) |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 5(2)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
|
|
(between terminals and the metal frame) | 1500V/0.5mA/60S |
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥100000 cycles | |
7 |
(Operating Temperature) | -25~125℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles
(Mechanical):60 cycles |
|
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability):(More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃
(Immersing Time):2~3S |
|
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S
(Manual Soldering):300±5℃ 2~3S |
|
12 |
(Safety Approvals) |
UL、CSA、VDE、ENEC、CE |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃
(Relative Humidity):65±5%RH (Air Pressure):86~106KPa |
Product detail pictures:
Related Product Guide:
We have now sophisticated machines. Our solutions are exported to the USA, the UK and so on, enjoying a great reputation amid consumers for China Wholesale Micro Switch No Nc Manufacturers - HK-04G-1AZ-029 – Tongda , The product will supply to all over the world, such as: Ghana , Saudi Arabia , Luxemburg , In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
By Jenny from Slovenia - 2018.12.28 15:18
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Moira from Lyon - 2017.03.28 16:34
Write your message here and send it to us