China Wholesale Micro Switch No Nc Suppliers - HK-04G-1AZ-018 – Tongda
China Wholesale Micro Switch No Nc Suppliers - HK-04G-1AZ-018 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
(Value) |
|
(Free Position) |
FP |
mm |
12.1±0.2 |
(Operating Position) |
OP |
mm |
11.5±0.5 |
|
(Releasing Position) |
RP |
mm |
11.7±0.5 |
|
(Total travel Position) |
TTP |
mm |
10.5±0.3 |
|
(Operating Force) |
OF |
N |
1.0~3.5 |
|
(Releasing Force) |
RF |
N |
— |
|
(Total travel Force) |
TTF |
N |
— |
|
(Pre Travel) |
PT |
mm |
0.3~1.0 |
|
(Over Travel) |
OT |
mm |
0.2(Min) |
|
(Movement Differential) |
MD |
mm |
0.4(Max) |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 5(2)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
|
|
(between terminals and the metal frame) | 1500V/0.5mA/60S |
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥100000 cycles | |
7 |
(Operating Temperature) | -25~125℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles
(Mechanical):60 cycles |
|
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability):(More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃
(Immersing Time):2~3S |
|
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S
(Manual Soldering):300±5℃ 2~3S |
|
12 |
(Safety Approvals) |
UL、CSA、VDE、ENEC、CE |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃
(Relative Humidity):65±5%RH (Air Pressure):86~106KPa |
Product detail pictures:
Related Product Guide:
We also provide item sourcing and flight consolidation solutions. We have now our very own manufacturing facility and sourcing place of work. We could provide you with nearly every kind of merchandise associated to our merchandise variety for China Wholesale Micro Switch No Nc Suppliers - HK-04G-1AZ-018 – Tongda , The product will supply to all over the world, such as: Finland , Macedonia , Milan , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Ivan from Egypt - 2017.10.27 12:12
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Tony from Portugal - 2017.06.25 12:48
Write your message here and send it to us