China Wholesale No Push Button Switch Manufacturers - HK-14-16A-016 – Tongda
China Wholesale No Push Button Switch Manufacturers - HK-14-16A-016 – Tongda Detail:
Size chart
Switch action Characteristics
The defining characteristics of operation | Operating Parameter | Value | Units |
Free Position FP | 15.9±0.2 | mm | |
Operating Position OP | 14.9±0.5 | mm | |
Releasing Position RP | 15.2±0.5 | mm | |
Total travel Position | 13.1 | mm | |
Operating Force OF | 0.25~4 | N | |
Releasing Force RF | — | N | |
Total travel Force TTF | — | N | |
Pre Travel PT | 0.5~1.6 | mm | |
Over Travel OT | 1.0Min | mm | |
Movement Differential MD | 0.4Max | mm |
Switch technical Characteristics
ITEM |
technical parameter |
Value |
|
1 |
Contact Resistance | ≤30mΩ Initial value | |
2 |
Insulation Resistance | ≥100MΩ500VDC | |
3 |
Dielectric Voltage | between non-connected terminals | 1000V/0.5mA/60S |
between terminals and the metal frame | 3000V/0.5mA/60S | ||
4 |
Electrical Life | ≥50000 cycles | |
5 |
Mechanical Life | ≥1000000 cycles | |
6 |
Operating Temperature | -25~125℃ | |
7 |
Operating Frequency | electrical:15 cycles Mechanical:60 cycles |
|
8 |
Vibration Proof |
Vibration Frequency:10~55HZ; Amplitude:1.5mm; Three directions:1H |
|
9 |
Solder Ability: More than 80% of immersed part shall be covered with solder | Soldering Temperature:235±5℃ Immersing Time:2~3S |
|
10 |
Solder Heat Resistance | Dip Soldering:260±5℃ 5±1S Manual Soldering:300±5℃ 2~3S |
|
11 |
Safety Approvals | UL,CSA,VDE,ENEC,TUV,CE,KC,CQC | |
12 |
Test Conditions |
Ambient Temperature:20±5℃ Relative Humidity:65±5%RH Air Pressure:86~106KPa |
Switch application: widely used in various household appliances, electronic equipment, automation equipment, communication equipment, automotive electronics, power tools and other fields.
Product detail pictures:
Related Product Guide:
We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for China Wholesale No Push Button Switch Manufacturers - HK-14-16A-016 – Tongda , The product will supply to all over the world, such as: Yemen , Rome , British , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jo from Swiss - 2017.07.28 15:46
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Hellyngton Sato from Haiti - 2017.02.14 13:19
Write your message here and send it to us