China Wholesale On Off On Rocker Switch Manufacturers - DK4-BZ-002 – Tongda
China Wholesale On Off On Rocker Switch Manufacturers - DK4-BZ-002 – Tongda Detail:
|
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
|
|
(Free Position) |
FP |
mm |
| (Operating Position) |
OP |
mm |
|
| (Releasing Position) |
RP |
mm |
|
| (Total travel Position) |
TTP |
mm |
|
| (Operating Force) |
OF |
N |
|
| (Releasing Force) |
RF |
N |
|
| (Total travel Force) |
TTF |
N |
|
| (Pre Travel) |
PT |
mm |
|
| (Over Travel) |
OT |
mm |
|
| (Movement Differential) |
MD |
mm |
Switch technical Characteristics
|
（ITEM） |
（technical parameter） |
（Value） |
|
|
1 |
（Electrical Rating） | 10(1.5)A 250VAC | |
|
2 |
（Contact Resistance） | ≤50mΩ( Initial value) | |
|
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
|
4 |
（Dielectric Voltage） | （between non-connected terminals） | 500V/0.5mA/60S |
| (between terminals and the metal frame) | 1500V/0.5mA/60S | ||
|
5 |
(Electrical Life) | ≥10000 cycles | |
|
6 |
(Mechanical Life) | ≥3000000 cycles | |
|
7 |
（Operating Temperature） | -25～105℃ | |
|
8 |
（Operating Frequency） | （electrical）:15 cycles（Mechanical）:60 cycles | |
|
9 |
（Vibration Proof） |
（Vibration Frequency）：10～55HZ； （Amplitude）：1.5mm; （Three directions）:1H |
|
|
10 |
(Solder Ability): (More than 80% of immersed part shall be covered with solder) | (Soldering Temperature)：235±5℃(Immersing Time)：2～3S | |
|
11 |
（Solder Heat Resistance） | （Dip Soldering）：260±5℃ 5±1S（Manual Soldering）：300±5℃ 2～3S | |
|
12 |
（Safety Approvals） |
UL、CSA、TUV、ENEC |
|
|
13 |
（Test Conditions） | （Ambient Temperature）：20±5℃（Relative Humidity）：65±5%RH
（Air Pressure）：86～106KPa |
|
Analysis of the overall operation flow of the micro switch
The overall operation process of the micro switch is detailed:
①Operating pressure OF: It is added to the button or the actuator to make the switch produce the maximum force required for forward action (connecting or disconnecting the circuit).
②Reverse operating force RF: The minimum force that the button or actuator can bear when the switch is reversed (disconnected or connected to the circuit).
③Contact pressure TF: The pressure of the static contact point when the button or actuator part is in the free position, or the pressure of the dynamic contact point when the button actuator part is in the limit position.
④Free position FP: The position from the highest point of the button or actuator to the base line of the switch mounting hole when the switch is in the normal state and is not subject to external force.
⑤Operation position OP: When the switch button or actuator component is in a positive action, the position from the highest point of the button or actuator component to the base line of the switch mounting hole.
⑥Restore position RP: When the switch button or actuator component is in reverse action, the position from the highest point of the button or actuator component to the base line of the switch mounting hole.
⑦Total movement TTP: The maximum position that the switch button or actuator component can allow to move when it is working.
⑧ Action stroke PT: The maximum distance from the free position of the switch button or actuator to the positive action position.
⑨ Overrun travel OT: The switch button or actuator component continues to move downward from the positive action position, and the distance to the limit position that does not end or damage the mechanical performance of the switch, usually takes the minimum value.
Product detail pictures:
Related Product Guide:
While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of China Wholesale On Off On Rocker Switch Manufacturers - DK4-BZ-002 – Tongda , The product will supply to all over the world, such as: Qatar , Adelaide , Roman , For many years, we now have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
By Muriel
from Guinea
- 2017.11.11 11:41
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Kevin Ellyson
from Sierra Leone
- 2017.05.02 11:33
