China Wholesale Plunger Micro Switch Pricelist - HK-04G-L D – Tongda
China Wholesale Plunger Micro Switch Pricelist - HK-04G-L D – Tongda Detail:
Switch action Characteristics
The defining characteristics of operation | Operating Parameter | Abbreviation | Units | Value |
Free Position | FP | mm | 12.1±0.2 | |
Operating Position | OP | mm | 11.5±0.5 | |
Releasing Position | RP | mm | 11.7±0.5 | |
Total travel Position | TTP | mm | 10.5±0.3 | |
Operating Force | OF | N | 1.0~3.5 | |
Releasing Force | RF | N | — | |
Total travel Force | TTF | N | — | |
Pre Travel | PT | mm | 0.3~1.0 | |
Over Travel | OT | mm | 0.2Min | |
Movement Differential | MD | mm | 0.4Max |
Switch technical Characteristics
ITEM |
technical parameter |
Value |
|
1 |
Electrical Rating | 52A 250VAC | |
2 |
Contact Resistance | ≤50mΩInitial value | |
3 |
Insulation Resistance | ≥100MΩ500VDC | |
4 |
Dielectric Voltage | between non-connected terminals | 500V/0.5mA/60S |
between terminals and the metal frame | 1500V/0.5mA/60S | ||
5 |
Electrical Life | ≥10000 cycles | |
6 |
Mechanical Life | ≥100000 cycles | |
7 |
Operating Temperature | -25~125℃ | |
8 |
Operating Frequency | electrical:15 cycles Mechanical:60 cycles |
|
9 |
Vibration Proof |
Vibration Frequency:10~55HZ; Amplitude:1.5mm; Three directions:1H |
|
10 |
Solder Ability: More than 80% of immersed part shall be covered with solder | Soldering Temperature:235±5℃ Immersing Time:2~3S |
|
11 |
Solder Heat Resistance | Dip Soldering:260±5℃ 5±1S Manual Soldering:300±5℃ 2~3S |
|
12 |
Safety Approvals | UL,CSA,VDE,ENEC,CE | |
13 |
Test Conditions | Ambient Temperature:20±5℃ Relative Humidity:65±5%RH Air Pressure:86~106KPa |
Switch application: widely used in various household appliances, electronic equipment, automation equipment, communication equipment, automotive electronics, power tools and other fields.
Product detail pictures:
Related Product Guide:
Our workforce through professional training. Skilled professional knowledge, solid sense of service, to fulfill the services demands of consumers for China Wholesale Plunger Micro Switch Pricelist - HK-04G-L D – Tongda , The product will supply to all over the world, such as: France , Iraq , Bolivia , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Denise from USA - 2017.02.18 15:54
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Ella from Puerto Rico - 2018.05.13 17:00
Write your message here and send it to us