China Wholesale Screw Terminal Micro Switch Quotes - HK-14-1X-16A-200 – Tongda
China Wholesale Screw Terminal Micro Switch Quotes - HK-14-1X-16A-200 – Tongda Detail:
Size chart
Switch action Characteristics
The defining characteristics of operation | Operating Parameter | Value | Units |
Free Position FP | 15.9±0.2 | mm | |
Operating Position OP | 14.9±0.5 | mm | |
Releasing Position RP | 15.2±0.5 | mm | |
Total travel Position | 13.1 | mm | |
Operating Force OF | 0.25~4 | N | |
Releasing Force RF | — | N | |
Total travel Force TTF | — | N | |
Pre Travel PT | 0.5~1.6 | mm | |
Over Travel OT | 1.0Min | mm | |
Movement Differential MD | 0.4Max | mm |
Switch technical Characteristics
ITEM |
technical parameter |
Value |
|
1 |
Contact Resistance | ≤30mΩ Initial value | |
2 |
Insulation Resistance | ≥100MΩ500VDC | |
3 |
Dielectric Voltage | between non-connected terminals | 1000V/0.5mA/60S |
between terminals and the metal frame | 3000V/0.5mA/60S | ||
4 |
Electrical Life | ≥50000 cycles | |
5 |
Mechanical Life | ≥1000000 cycles | |
6 |
Operating Temperature | -25~125℃ | |
7 |
Operating Frequency | electrical:15 cycles Mechanical:60 cycles |
|
8 |
Vibration Proof |
Vibration Frequency:10~55HZ; Amplitude:1.5mm; Three directions:1H |
|
9 |
Solder Ability: More than 80% of immersed part shall be covered with solder | Soldering Temperature:235±5℃ Immersing Time:2~3S |
|
10 |
Solder Heat Resistance | Dip Soldering:260±5℃ 5±1S Manual Soldering:300±5℃ 2~3S |
|
11 |
Safety Approvals | UL,CSA,VDE,ENEC,TUV,CE,KC,CQC | |
12 |
Test Conditions |
Ambient Temperature:20±5℃ Relative Humidity:65±5%RH Air Pressure:86~106KPa |
Switch application: widely used in various household appliances, electronic equipment, automation equipment, communication equipment, automotive electronics, power tools and other fields.
Different types of micro switches
A micro switch is a contact mechanism that has a small contact interval and a snap-action mechanism, and uses a specified stroke and a specified force to switch the contact mechanism. It is covered by a shell and has a drive rod outside of it. Southeast Electronics will introduce the different types of micro switches below.
Southeast Electronics
The external mechanical force of the micro switch acts on the action reed through the transmission elements (press pins, buttons, levers, rollers, etc.). When the action reed is displaced to the critical point, it will produce instantaneous action, making the moving contact at the end of the action reed. Quickly connect or disconnect with fixed contacts.
When the force on the transmission element of the micro switch is removed, the action reed produces a reverse action force. When the reverse stroke of the transmission element reaches the critical point of the action of the reed, the reverse action is instantaneously completed. The contact distance of the micro switch is small, the action stroke is short, the pressing force is small, and the on-off is rapid. The movement speed of the moving contact has nothing to do with the movement speed of the transmission element.
There are many types of micro switches, and there are hundreds of internal structures. They are divided into ordinary, small and ultra-small according to the volume; according to the protection performance, they are divided into waterproof, dustproof, and explosion-proof; according to the breaking form, there are single-connection Type, double type, multi-connected type. At present, there is also a strong disconnection micro switch (when the reed of the switch does not work, the external force can also make the switch disconnect).
Micro switches are classified into ordinary type, DC type, micro current type, and high current type according to their breaking capacity. According to the use environment, there are ordinary type, high temperature resistant type (250℃), super high temperature resistant ceramic type (400℃). The basic type of micro switch is generally without auxiliary pressing attachment, and derives small stroke type and large stroke type. Different auxiliary pressing accessories can be added according to the needs. According to the different pressing accessories added, the switch can be divided into various forms such as button type, reed roller type, lever roller type, short boom type, long boom type, etc.
Product detail pictures:
Related Product Guide:
Our company promises all users of the first-class products and the most satisfying post-sale service. We warmly welcome our regular and new customers to join us for China Wholesale Screw Terminal Micro Switch Quotes - HK-14-1X-16A-200 – Tongda , The product will supply to all over the world, such as: Mauritius , Peru , Costa Rica , Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!
By Gabrielle from Portland - 2017.09.30 16:36
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Beatrice from South Africa - 2018.09.21 11:44