DK4-BZ-002
Micro Switch 3Pin SPDT Mini Limit Switch 10A 250VAC Roller Arc lever Snap Action Push Micro switches
| (Halayen ma'anar aiki) | (Operating Parameter) | (Taƙaice) | (Raka'a) |
|
| (Mataki Kyauta) | FP | mm |
| (Matsayin Aiki) | OP | mm | |
| (Matsayin Saki) | RP | mm | |
| (Jimlar Matsayin tafiya) | TTP | mm | |
| (Rundunar Ayyuka) | OF | N | |
| (Karfin Saki) | RF | N | |
| (Jimlar tafiye-tafiye Force) | TTF | N | |
| (Kafin Tafiya) | PT | mm | |
| (A kan Tafiya) | OT | mm | |
| (Bambancin Motsi) | MD | mm |
Canja Halayen fasaha
| (ITEM) | (ma'auni na fasaha) | (Daraja) | |
| 1 | (Kimanin Lantarki) | 10 (1.5) A 250VAC | |
| 2 | (Contact Resistance) | ≤50mΩ(ƙimar farko) | |
| 3 | (Juriya na Insulation) | ≥100MΩ(500VDC) | |
| 4 | (Dielectric Voltage) | (tsakanin tashoshin da ba a haɗa su ba) | 500V/0.5mA/60S |
| (tsakanin tashoshi da karfen karfe) | 1500V/0.5mA/60S | ||
| 5 | (Rayuwar Wutar Lantarki) | ≥10000 hawan keke | |
| 6 | (Rayuwar Makanikai) | ≥3000000 hawan keke | |
| 7 | (Aikin Zazzabi) | -25 ~ 105 ℃ | |
| 8 | (Yawan Aiki) | (lantarki): 15hawan keke(Makanikanci): 60hawan keke | |
| 9 | (Hujja ta Jijjiga) | (Yawan Vibration): 10 ~ 55HZ; Girman girma: 1.5mm; (Hanyoyi uku): 1H | |
| 10 | (Irin Solder): (Fiye da 80% na ɓangaren da aka nutsar da shi za a rufe shi da mai siyarwa) | (Zazzabi mai siyarwa): 235 ± 5 ℃ (Lokacin Immersing): 2～ 3S | |
| 11 | (Solder Heat Resistance) | (Dip Soldering): 260 ± 5 ℃ 5 ± 1S (Manual Soldering): 300 ± 5 ℃ | |
| 12 | ( Amincewa da Tsaro ) | UL, CSA, TUV, ENEC | |
| 13 | (Sharuɗɗan gwaji) | (Zazzabi na yanayi): 20 ± 5 ℃ (Danshi na Dangi) (Matsin Iska): 86 ~ 106KPa | |
Analysis na gaba ɗaya kwararar aiki na micro switch
An yi daki-daki dalla-dalla ga tsarin aiki gaba ɗaya na micro switch:
①Matsi na aiki OF: Ana ƙarawa zuwa maɓalli ko mai kunnawa don sanya maɓalli ya samar da iyakar ƙarfin da ake buƙata don aikin gaba (haɗi ko cire haɗin kewaye).
② Juya ƙarfin aiki RF: Matsakaicin ƙarfin da maɓalli ko mai kunnawa za su iya ɗauka lokacin da aka juya (an cire haɗin ko haɗawa da kewaye).
③Matsi lamba TF: Matsi na madaidaicin wurin tuntuɓar lokacin da maɓallin ko ɓangaren mai kunnawa ke cikin matsayi na kyauta, ko matsin lamba mai ƙarfi lokacin da ɓangaren mai kunna maɓalli yana cikin matsakaicin matsayi.
④ Matsayi na kyauta FP: Matsayi daga matsayi mafi girma na maballin ko mai kunnawa zuwa layin tushe na ramin mai sauyawa lokacin da mai canzawa ya kasance a cikin yanayin al'ada kuma ba a ƙarƙashin karfi na waje.
⑤ Matsayin aiki OP: Lokacin da maɓallin kunnawa ko ɓangaren mai kunnawa ya kasance a cikin kyakkyawan aiki, matsayi daga mafi girman maɓalli ko kayan aikin mai kunnawa zuwa layin tushe na rami mai hawa mai sauyawa.
⑥Mayar da matsayi RP: Lokacin da maɓallin kunnawa ko ɓangaren mai kunnawa ya kasance a cikin aikin baya, matsayi daga matsayi mafi girma na maɓalli ko kayan aikin actuator zuwa layin tushe na ramin hawan motsi.
⑦ Jimlar motsi TTP: Matsakaicin matsayi wanda maɓallin sauyawa ko bangaren actuator zai iya ba da damar motsawa lokacin da yake aiki.
⑧ Action bugun jini PT: Matsakaicin nisa daga matsayi na kyauta na maɓallin sauyawa ko mai kunnawa zuwa matsayi mai kyau.
⑨ Overrun tafiya OT: Maɓallin sauyawa ko bangaren actuator yana ci gaba da matsawa ƙasa daga kyakkyawan matsayi na aiki, da nisa zuwa matsakaicin matsayi wanda baya ƙare ko lalata aikin injin na sauya, yawanci yana ɗaukar ƙaramin ƙima.
