HK-04G-LZ-107
lever canza micro sauya smd ƙaramin micro sauya KW12
| (Halayen ma'anar aiki) | (Operating Parameter) | (Taƙaice) | (Raka'a) | (darajar) |
|
| (Mataki Kyauta) | FP | mm | 12.1 ± 0.2 |
| (Matsayin Aiki) | OP | mm | 11.5 ± 0.5 | |
| (Matsayin Saki) | RP | mm | 11.7± 0.5 | |
| (Jimlar Matsayin tafiya) | TTP | mm | 10.5± 0.3 | |
| (Rundunar Ayyuka) | OF | N | 1.0 zuwa 3.5 | |
| (Karfin Saki) | RF | N | - | |
| (Jimlar tafiye-tafiye Force) | TTF | N | - | |
| (Kafin Tafiya) | PT | mm | 0.3 zuwa 1.0 | |
| (A kan Tafiya) | OT | mm | 0.2 (min) | |
| (Bambancin Motsi) | MD | mm | 0.4 (Max) |
Canja Halayen fasaha
| (ITEM) | (ma'auni na fasaha) | (Daraja) | |
| 1 | (Kimanin Lantarki) | 5 (2) A 250VAC | |
| 2 | (Contact Resistance) | ≤50mΩ(ƙimar farko) | |
| 3 | (Juriya na Insulation) | ≥100MΩ(500VDC) | |
| 4 | (Dielectric Voltage) | (tsakanin tashoshin da ba a haɗa su ba) | 500V/0.5mA/60S |
|
|
| (tsakanin tashoshi da karfen karfe) | 1500V/0.5mA/60S |
| 5 | (Rayuwar Wutar Lantarki) | ≥10000 hawan keke | |
| 6 | (Rayuwar Makanikai) | ≥100000 hawan keke | |
| 7 | (Aikin Zazzabi) | -25 ~ 125 ℃ | |
| 8 | (Yawan Aiki) | (lantarki): 15hawan keke (Makanikanci): 60hawan keke | |
| 9 | (Hujja ta Jijjiga) | (Yawan Vibration): 10 ~ 55HZ; Girman girma: 1.5mm; (Hanyoyi uku): 1H | |
| 10 | (Irin Solder): (Fiye da kashi 80% na ɓangaren da aka nutsar za a rufe shi da mai siyarwa) | (Siyarwa Zazzabi): 235 ± 5 ℃ (Lokacin Ciki): 2～3S | |
| 11 | (Solder Heat Resistance) | (Dip Soldering): 260 ± 5 ℃ 5 ± 1S (Sayar da Manual): 300± 5℃ 2～3S | |
| 12 | ( Amincewa da Tsaro ) | UL, CSA, VDE, ENEC, CE | |
| 13 | (Sharuɗɗan gwaji) | (Zazzabi na yanayi) ：20± 5℃ (Yancin Dangi): 65± 5% RH (Matsin Iska): 86 ~ 106KPa | |
Menene aikin maɓalli na mahaɗar ruwa?
Mutane da yawa suna tambayar menene aikin micro switch da aka sanya a cikin injin ruwa?Da farko dai, maɓallin micro shine don amfani da matsa lamba na ruwa don turawa micro switch don kunna lokacin da kuka kunna wutar lantarki don sarrafa sashin kula da wutar lantarki don aiki: babban matsi na wuta da solenoid valve bude.(Lokacin da aka sami matsa lamba na ruwa, ana buɗe kewaye ta atomatik. Lokacin da babu ruwan ruwa, ana rufe kewaye ta atomatik).
Shawarar labari mai kyau: Yadda za a shigar da micro switch, da fatan za a koma ga amsar?
Idan micro switch ya yi gajeriyar kewayawa, ba za a sarrafa na'urar bututun ruwa ba, kuma tukunyar ruwan ku zai ci gaba da aiki (matsi mai ƙarfi yana ci gaba da ƙonewa kuma bawul ɗin solenoid yana ci gaba).
Don sarrafa wutar lantarki, dole ne a yi amfani da maɓalli na micro.Ba za a iya amfani da shi a cikin gajeren kewaye ba.Ta wannan hanyar, bawul ɗin solenoid koyaushe yana buɗewa lokacin da ba ku amfani da injin ruwa, kuma iskar gas ɗin za ta saki kuma ta haifar da haɗari.
Ina madaidaicin madaidaicin wurin yake?
Maɓalli na matattarar ruwan gas gabaɗaya yana kan igiyar wutar lantarki.Za a sami mahaɗin murabba'i a kan igiyar wutar lantarki, sannan za ku ga maɓallin ja da rawaya, wanda ke wakiltar ɗaya a kunne da ɗaya;na'urar dumama na'urar dumama ruwan iskar gas a ƙasan tsakiyar na'urar, sai ka ƙwace harsashin na'urar na'urar, sa'an nan kuma kunna wutar shigar ruwa ta na'urar wutar lantarki, za ka ga mai jan ciki zai motsa micro switch.
Micro switch yana taka muhimmiyar rawa a cikin na'urar dumama ruwa, saboda wutar lantarkin ruwa, kunna bawul ɗin solenoid, da dai sauransu duk ana sarrafa su ta hanyar micro switch, wanda yayi daidai da micro switch ba a rufe kuma duk ba zai yi aiki ba.
