HK-04G-2AZ-100
| (Sifada qeexaya shaqada) | (Operating Parameter) | (Gaabin) | (Cutubyo) | (Qiimaha) |
|
| (Jago Xor ah) | FP | mm | 12.1 ± 0.2 |
| (Mawqifka hawlgalka) | OP | mm | 11.5±0.5 | |
| (Booska sii deynta) | RP | mm | 11.7±0.5 | |
| (Guud ahaan Booska safarka) | TTP | mm | 10.5±0.3 | |
| (Ciidanka Hawlgelinta) | OF | N | 1.0 ilaa 3.5 | |
| (Ciidanka sii daynta) | RF | N | - | |
| (Guud ahaan ciidanka safarka) | TTF | N | - | |
| (Safarka Ka Hor) | PT | mm | 0.3 ilaa 1.0 | |
| (Safarka ka badan) | OT | mm | 0.2 (Daqdi) | |
| (Ka duwanaanshaha Dhaqdhaqaaqa) | MD | mm | 0.4 (Max) |
Bedel sifooyinka farsamada
| (ITEM) | (beeg farsamo) | (Qiimaha) | |
| 1 | (Qiimaynta Korontada) | 5(2)A 250VAC | |
| 2 | (iska caabinta xidhiidhka) | ≤50mΩ(Qiimaha hore) | |
| 3 | (iska caabinta dahaadhka) | ≥100MΩ(500VDC) | |
| 4 | (Dielectric Voltage) | (inta u dhaxaysa terminaalka aan ku xidhnayn) | 500V/0.5mA/60S |
|
|
| (inta u dhaxaysa terminaalka iyo birta) | 1500V/0.5mA/60S |
| 5 | (Nolosha Korontada) | ≥10000 wareeg | |
| 6 | (Nolosha Makaanikada) | ≥100000 wareeg | |
| 7 | (Heer kulka shaqada) | -25 ～125 ℃ | |
| 8 | (Soo noqnoqoshada) | (koronto): 15wareegyada ( Makaanikada ): 60wareegyada | |
| 9 | (Caddaynta Gariir) | Inta jeer ee gariirka: 10 ~ 55HZ; (Baaxadda): 1.5mm; (Saddex jiho): 1H | |
| 10 | (Awoodda Alxan): (In ka badan 80% qaybta la quusiyay waa in lagu daboolaa alxanka) | (Heerkulka iibinta): 235 ± 5 ℃ (Waqtiga Immersing): 2～3S | |
| 11 | (Alxanka Caabbinta Kulaylka) | (Dip Soldering): 260± 5℃ 5± 1S (Alxanka gacanta) ：300±5℃ 2～3S | |
| 12 | (Ansaxinta Badbaadada) | UL, CSA, VDE, ENEC, CE | |
| 13 | (Xaaladaha Imtixaanka) | (Heer kulka deegaanka) ：20±5℃ (Qoyaan Qaraabo ah): 65± 5% RH (Cadaadiska Hawada): 86～106KPa | |
Halkan ku qor fariintaada oo noo soo dir
