DK4-BZ-002
Micro Switch 3Pin SPDT Mini Limit Switch 10A 250VAC Roller Arc lever Snap Action Push Micro switches
| (Litšobotsi tse hlalosang ts'ebetso) | (Parameter e sebetsang) | (Khutsufatso) | (Diyuniti) |
|
| (Maemo a Mahala) | FP | mm |
| (Boemo ba Ts'ebetso) | OP | mm | |
| (Boemo ba ho Lokolla) | RP | mm | |
| (Kakaretso ea Maeto) | TTP | mm | |
| (Operating Force) | OF | N | |
| (Releasing Force) | RF | N | |
| (Total travel Force) | TTF | N | |
| (Maeto a Pele) | PT | mm | |
| (Maeto a Felletseng) | OT | mm | |
| (Movement Differential) | MD | mm |
Fetola Litšobotsi tsa tekheniki
| （ITEM） | (parameter ea tekheniki) | （Boleng） | |
| 1 | (Tlhahiso ea Motlakase) | 10(1.5)A 250VAC | |
| 2 | (Contact Resistance) | ≤50mΩ( Boleng ba pele) | |
| 3 | (Insulation Resistance) | ≥100MΩ(500VDC) | |
| 4 | (Dielectric Voltage) | (pakeng tsa li-terminals tse sa hokahaneng) | 500V/0.5mA/60S |
| (pakeng tsa li-terminals le foreimi ea tšepe) | 1500V/0.5mA/60S | ||
| 5 | (Bophelo ba Motlakase) | ≥10000 lipotoloho | |
| 6 | (Bophelo ba Mechini) | ≥3000000 lipotoloho | |
| 7 | (Mocheso oa ho sebetsa) | -25℃105℃ | |
| 8 | (Makhetlo a ho sebetsa) | (motlakase):15lipotoloho(Mechini):60lipotoloho | |
| 9 | (Bopaki ba Vibration) | (Makhetlo a Vibration): 10 ~ 55HZ; (Amplitude): 1.5mm; (Litsela tse tharo): 1H | |
| 10 | (Bokhoni ba Solder): (Ho feta 80% ea karolo e qoelitsoeng e tla koaheloa ka solder) | (Mocheso oa Soldering): 235±5℃(Nako ea ho qoelisoa):2～3S | |
| 11 | (Solder Heat Resistance) | (Dip Soldering): 260±5℃ 5±1S(Manual Soldering):300±5℃ 2～3S | |
| 12 | (Litumello tsa Tšireletso) | UL, CSA, TUV,ENEC | |
| 13 | (Maemo a Teko) | (Ambient Mocheso):20±5℃ (Mongobo o Relative):65±5%RH (Khatello ea Moea): 86 ~ 106KPa | |
Tlhahlobo ea phallo e akaretsang ea ts'ebetso ea micro switch
Kakaretso ea ts'ebetso ea micro switch e hlalositsoe ka botlalo:
① Khatello ea ho sebetsa EA: E eketsoa ka konopo kapa actuator ho etsa hore switch e hlahise matla a mangata a hlokahalang bakeng sa ketso ea pele (ho hokahanya kapa ho khaola potoloho).
②Reverse operation force RF: Matla a fokolang ao konopo kapa actuator e ka a mamellang ha switjha e khutlisetsoa morao (e khaotsoe kapa e hokahane le potoloho).
③Contact Pressure TF: Khatello ea sebaka sa ho ikopanya se tsitsitseng ha konopo kapa karolo ea actuator e le maemong a mahala, kapa khatello ea sebaka se matla sa ho ikopanya ha karolo ea konopo ea actuator e le maemong a lekantsoeng.
④Free boemo ba FP: Boemo ho tloha sebakeng se phahameng ka ho fetisisa sa konopo kapa actuator ho ea moleng oa motheo oa lesoba le kenyang switch ha switch e le maemong a tloaelehileng 'me e sa laoloe ke matla a kantle.
⑤ Boemo ba ts'ebetso OP: Ha konopo ea switjha kapa karolo ea actuator e le ts'ebetsong e ntle, boemo bo tloha sebakeng se phahameng ka ho fetisisa sa konopo kapa karolo ea actuator ho ea moleng oa motheo oa lesoba le ntseng le hola.
⑥Khutlisa boemo ba RP: Ha konopo ea switch kapa actuator e khutlela morao, boemo bo tloha holimo ho konopo kapa karolo ea actuator ho ea moleng oa motheo oa lesoba le ntseng le hola.
⑦TTP eohle ea motsamao: Boemo bo phahameng boo konopo ea switch kapa actuator e ka lumellang ho tsamaea ha e sebetsa.
⑧ Action stroke PT: Sebaka se seholo ho tloha sebakeng sa mahala sa konopo ea switch kapa actuator ho ea sebakeng se nepahetseng sa ketso.
⑨ Overrun travel OT: Konopo ea switjha kapa karolo ea actuator e ntse e tsoela pele ho theoha ho tloha sebakeng se nepahetseng sa ketso, 'me sebaka se fihlang sebakeng se sa feleng kapa se sa senyeheng ts'ebetso ea mochini oa switch, hangata se nka boleng bo tlase.
